全自動界面張力儀-微機控制
JZL-200B微控全自動界面張力儀
一、技術參數
1、測量方法： 微控全自動
2、測量范圍： 0-199.9mN/m
3、zui小分辨率：0.01mN/m
4、鉑金環半徑：R9.55mm
5、鉑金絲半徑: r0.3mm
6、電源：200V 50Hz
7、具有繪制曲線顯示峰值功能
8、示值重復性誤差不大于1%
9、示值相對誤差不大于±1%
10、自動調零
11、外形尺寸400*220*350mm
12、凈重15公斤
二、結夠性能：
PC機控制，實時顯示張力和曲線自動調零，峰值保持，實驗結果自動計算打印，實驗臺自動升降。
三、符合標準：JB/T9388 ISO/1409
四：適用范圍：
采用物理方法測試各種液體、界面張力值。廣泛用于水、電部門對絕緣油質的監管及石油、化工、科學研究和大專院校教學等。用微控全自動界面張力儀可以迅速準確地測出各種液體表面、界面張力值，采用Windows 標準界面，以Win9X/Win2000/WinXP為工作平臺，結果自動顯示，記錄。曲線可存儲打印。運行平穩，噪音小。
五、基本配置：
1.主機 1臺
2.鉑金環 1個
3.掛鉤 1個
4.扭力絲 1個
5.燒杯 1個
6.電腦 1臺
7.打印機 1臺
8.軟件安裝盤 1個
關于更多 全自動界面張力儀-微機控制 詳細資料請您
Automatic interface tensiometer - microcomputer control
Micro control automatic interface tensiometer JZL - 200 - b
A, technical parameters
1, the measurement methods: micro control automatic
2, measuring range: 0-199.9 mN/m
3, the minimum resolution: 0.01 mN/m
4, platinum ring radius: R9.55 mm
5, platinum wire radius: r0.3 mm
6, power supply: 200 v, 50 hz
7, with functions of drawing curve peak value
8, repeatability error value is not greater than 1%
9, in value relative error is not more than plus or minus 1%
10, automatic zero
11, appearance size 400 * 220 * 350 mm
12, 15 kg net
Second, the knot is enough performance:
PC computer control, automatic zero real-time display tension and curve, peak holding, the experimental results automatic calculation printing, automatic test bench.
Three, accord with a standard: JB/T9388 ISO / 1409
Four: the scope of application:
By adopting the method of physical testing all kinds of liquid, interfacial tension values. Widely used in the regulation of insulation oil and water, electricity department of petroleum, chemical industry, scientific research, colleges and universities teaching and so on. With micro control automatic interface tensiometer can promptly and accuray detect all kinds of liquid surface and interfacial tension values, using standard Windows interface, with Win9X/Win2000 WinXP as work platform, the results automatically, according to records. Curve can be stored to print. Smooth operation, low noise.
Five, the basic configuration:
1. The host 1
2. The platinum ring 1
3. The hook one
4. The torsion wire 1
5. 1 beaker
Computer 1 6.
7. A printer 1
8. Software installation disk 1
